CGZXF - M 100
- MSDS: CGZXF
- Manufacturer: ADHESIVE SYSTEMS INC
- Product Name: M 100
- National Stock Number: 8040-00N085064
Product Identification
Product ID:M 100
MSDS Date:07/20/1993
FSC:8040
NIIN:00N085064
MSDS Number: CGZXF
Responsible Party
FRANKFORT, IL 60423
US
Emergency Phone: 800-255-3924
Info Phone: 815-464-5606
Preparer: KEVIN SMITH
Cage: 0RE06
Contractor
Telephone: 708-333-5600
Cage: ADSSY
Ingredients
ACRYLIC ACID, 2-CYANO-, METHYL ESTER; (METHYL
CAS: 137-05-3
RTECS: AS7000000
Fraction By Weight: 90-98%
OSHA PEL 2 PPM
ACGIH TLV: 2 PPM;4 STEL
POLYMETHYLMETHACRYLATE; (POLY METHYL METHACRYLATE)
CAS: 9011-14-7
RTECS: TR0400000
Fraction By Weight: 5-10%
OSHA PEL N/K
ACGIH TLV: N/K
HYDROQUINONE (SARA 302/313) (CERCLA)
CAS: 123-31-9
RTECS: MX3500000
Fraction By Weight: 0.1-0.5%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IN RARE CASES LG AMT WILL INCR TEMP ENOUGH TO
RTECS: 9999999ZZ
(EYELID TO EYELID OR EYEBALL
RTECS: 9999999ZZ
BONDED TO EYEBALL WASH THORO W/WARM WATER FOR AT LST
RTECS: 9999999ZZ
FURTHER ACTION, TYPICALLY IN 1-4 DAYS. THERE WILL BE
RTECS: 9999999ZZ
NATURAL CLEANSING ACTION OF EYE TAKES PLACE.
RTECS: 9999999ZZ
ATTACH ITSELF TO EYE PROTEIN & WILL DISASSOCIATE FROM
RTECS: 9999999ZZ
SEVERAL HRS. THIS WILL CAUSE PERIODS OF TEARING UNTIL
RTECS: 9999999ZZ
OUT OF EYE NORMALLY IN A MATTER OF HRS, EVEN W/GROSS
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:LD50:(ORAL) >5,000 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:BONDS SKIN RAPIDLY & STRONGLY. SKIN
AND EYE IRRITANT. VAPOR IS IRRITATING TO EYES AND MUCOUS MEMBRANES
ABOVE TLV. PROLONGED AND REPEATED OVEREXPOSURE TO VAPORS MAY
PRODUCE ALLERGIC REACTIONS WITH ASTH MALIKE SYMPTOMS IN SENSITIVE
INDIVIDUALS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:IF LIPS ARE ACCIDENTALLY STUCK TOGETHER, APPLY LOTS OF
WARM WATER TO LIPS & ENCOURAGE MAX WETTING & PRESS FROM SALIVA
INSIDE MOUTH. PEEL/ROLL LIPS APART. DO NOT TRY TO PULL LIPS APART
W/DIRECT OPPOSING ACTION, IT IS ALMOST IMPOSS TOSWALLOW
CYANOACRYLATE. ADHESIVE SOLIDIFIES & ADHERES IN MOUTH. SALIVA WILL
LIFT ADHESIVE IN 1/2 TO 2 DAYS. INHAL:REMOVE TO FRESH AIR. TREAT
(SUPP DATA)
Fire Fighting
Flash Point:>185F,>85C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . OVEREXPOSURE TO DECOMPOSITION OF PRODUCTS MAY BE A
HEALTH HAZARD.
Unusual Fire/Explosion Hazard:DO NOT USE CLOTH TO WIPE UP SPILLS. USE
WATER ON SPILLS TO POLYMERIZE & THEN SCRAPE UP RESIDUE.
Accidental Release
Spill Release Procedures:FLOOD AREA W/WATER TO POLYMERIZE (CURE). SOAK
UP W/INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE OUT OF DIRECT SUNLIGHT AT OR
BELOW 72F TO PRESERVE SHELF LIFE. AVOID BREATHING VAPOR.
Other Precautions:AVOID CONTACT W/SKIN, EYES & CLOTHING. KEEP OUT OF
REACH OF CHILDREN! READ INSTRUCTIONS CAREFULLY.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST, CROSS AIR MOVEMENT.
Protective Gloves:POLYETHYLENE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:SYMTOMATICALLY. SKIN:(ADHESION): FIRST IMMERSE BONDED
SURF IN WARM SOAPY WATER. PEEL/ROLL SURF APART W/AID OF BLUNT EDGE
(PENCIL, SPOON HANDLE, ETC), THEN REMOVE ADHESIVE W/SOAP & WATER .
DO NOT TRY TO PULL SURF APART W/DIRECT OPPOSING ACTION.
(BURNS):CYANOACRYLATES GIVE OFF HEAT ON SOLIDIFICATION.(ING 4)
Chemical Properties
Boiling Pt:B.P. Text:>150F,>66C
Vapor Density:>1
Spec Gravity:1.09
Solubility in Water:POLYMERIZED BY WATER
Appearance and Odor:COLORLESS LIQUID; SLIGHTLY PUNGENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
POLYMERIZED BY CONTACT W/WATER, ALCOHOLS, AMINES, ALKALINES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HAZARDOUS PRODUCTS FORMED BY FIRE OR
THERMAL DECOMPOSITION: IRRITATING ORGANIC VAPORS.
Disposal
Waste Disposal Methods:POLYMERIZE AS ABOVE. INCINERATE, OR SOLID
ADHESIVE CAN BE LANDFILLED I/A/W ALL APPLICABLE FEDERAL, STATE &
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.